Autopage RS-727LCD Manuel d'utilisateur télécharger pdf (Page 8)

6. Vibration / Melody Mode:

This is useful when you are in a noisy place and it is difficult to

hear the beep sound from the remote control. In this mode,

the remote control vibrates itself if your security system is

triggered.

Press the button first, within 3 seconds press and hold

( ) button for 2 seconds to select the mode of vibration or

melody, the icon will displayed on the LCD screen to show

the LCD remote transmitter is on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

It has a short “bi” sound while pressing the button of the LCD screen transmitter

If you want mute the “bi” sound mute always while press button. Press the button

first, within 3 seconds press and hold the (Bi) button for 2 seconds to disable the

“bi” sound.

8. Low Battery Indication:

When the power of the battery weakens, it has two short “bi” sound and flash

icon while pressing the button of the LCD screen transmitter.

9. Set Up Fixed Count Down Timer:

1. Press the

button first, within 3 seconds press and hold the ( ) button for

2 seconds, the LCD screen will show the icon and timer (i.e. 0:10),

2. Press the ( ) button again showing next order time on the screen (ie.0: 20),

press them again (ie.0: 30)…and so on.

3. After the timer is set the count down begins when the icon flashes

Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1

hour, 1.5 hours and 2 hours maximum.

a. When the count down timer shows 0:00 it means to turn off the timer.

b. Press button for real time indication when the timer is counting down.

10. Out Of Range Indication:

The system will automatically check the range every 20 minutes after the unit is

armed.

1. If the user is within the range, the icon will display on the LCD screen.

2. If user is out of range, it has five short “bi” sounds and the icon will disappear on

the LCD screen.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

Pas de commentaire

Autopage RS-727LCD Manuel d'utilisateur Page 8